How To Install Stone Veneer On Interior Wall

Necessary Tools And Materials

Having the essential tools and materials on hand for this task is the first step of the process. You will need the following items to install stone veneer on an interior wall:

• Measuring tape.
• Notched towel.
• Wet saw or circular saw featuring a diamond blade.
• Level.
• Stone veneer panels.
• Adhesive mortar.
• Grout bag.
• Grout sponge.
• Hammer and chisel.
• Safety glasses and gloves.

How To Install Stone Veneer Interior Wall

Before starting this task, it is recommended to have a helper or two by your side. Stone veneer can be quite heavy and hard to handle when this project is done alone.

Follow the steps outlined below to complete this task properly.

Step 1. Prepare The Wall

• Preparing the wall is the first step here.
• This means removing the existing paint or wallpaper, sanding down rough spots, and eventually cleaning the wall with a damp cloth.
• You can apply the adhesive that’ll secure the veneer once the wall is fully prepped.

Step 2. Install The Stone Veneer

• After the adhesive is applied, it’s time to install the stone veneer.
• Begin by cutting pieces of the veneer to fit the wall.
• Next, apply them one at a time with a putty knife or trowel.
• Try to spread an even layer of adhesive onto each piece.
• Firmly press each piece into place to properly adhere it to the wall.

Step 3. Apply Finishing Touches

• When the stone veneer is installed, it’s time to add a few finishing touches.
• You can grout between each piece of stone, for example.
• You can also seal the stone veneer with a sealant specifically designed to protect stone surfaces from moisture and dirt.

Step 4. Cure The Stone Veneer

• Curing the stone veneer is essential because it allows the adhesive to settle and secure the veneer to the wall.
• Make sure to avoid any issues with the wall during this step.
• Depending on the type of glue used, curing time could vary.
• Always follow your manufacturer’s instructions.

Step 5. Clean The Surface

• Once the stone veneer has had enough time to cure, it’s best to clean up the area.
• Use a damp sponge to efficiently wipe away excess grout that may appear on the surface of the veneer.
• Being gentle with this process is crucial as this will avoid damaging the newly installed stone veneer.
• Clean your tools afterward and follow all local regulations for proper disposal.

Step 6. Visual Inspection

• Do a thorough inspection of your work after the cleaning process is complete.
• Ensure all the stones are firmly adhered to the wall and that no pieces appear loose.
• If you find any that are loose, reapply the adhesive and carefully press the stones back into place.
• Make sure your grout lines are clean and even, if applicable.

Step 7. Add Decorative Touches

• If you wish to enhance the wall’s appearance with decorative items, now is the time.
• For instance, homeowners may wish to add a mirror, art, or floating shelves.
• Each of these can make your living space more inviting and aesthetically pleasing.

Step 8. Keep Up With Maintenance Needs

• Keeping up with regular maintenance needs will keep your interior wall in the best shape possible.
• To clean the surface, use a soft brush in order to dust.
• You can also use a mixture of water and mild soap for a deeper clean.
• Dry the surface off completely after cleaning to prevent any damage created by moisture buildup.
• Always refrain from using any harsh chemicals.

Conclusion

Once your DIY project has been completed, it’s time to enjoy your new stone veneer wall. The wall will undoubtedly be a focal point of the room, creating a touch of texture and charm.

If you cannot do this project yourself, contact the experienced team at DBS Inc for more information today!