Written by Brian B

Cost To Run Gas Fireplace In 2022

How Much Does It Cost To Run A Gas Fireplace

The energy consumption of a gas fireplace is measured in British Thermal Units (BTU). Therefore, one BTU is the total amount of energy needed to boost the temperature of one pound of water by one degree Fahrenheit. If a fireplace comes with a BTU rating of 30,000, adding in the cost of gas at 90 cents per therm, multiply the two figures, then divide by 100,000 to estimate your monthly costs.

For example, the average monthly cost to run a gas fireplace in Arizona is $15.62, according to EIA.gov. If you are searching for “how much does it cost to run a gas fireplace“, this post will break down all the variables affecting overall costs.

Gas Fireplace Costs

Here are a few of the factors affecting overall costs to run a gas fireplace:

  • The Price Of Gas
  • Electricity Comparison
  • Central Heat Comparison
  • Gas Fireplace Installation Cost

The Price Of Gas

The price of gas is one of the biggest factors affecting the cost of owning and running a gas fireplace. Of course, location is crucial is determining how much you’ll have to spend. Season and market conditions will undoubtedly come into play, as well. With gas prices currently soaring across the nation, gas fireplaces will be more costly to operate for the foreseeable future.

Electricity Comparison

First, determine how much electricity costs per therm so that you can accurate compare the gas fireplace operating costs to the cost of electric heat. Electricity costs are determined by kilowatt hours. One kilowatt is equivalent to 3,413 BTUs. The easiest way to figure out your cost is to multiply the kilowatt-hour cost of electricity by 100,000, then divide that number by 3,413. It sounds complicated, but it’s very important for homeowners on a budget to estimate costs ahead of installation.

Central Heat Comparison

Comparing gas fireplace operation costs to the cost of a gas central heating system will require various considerations. The fuel cost will remain the same since both appliances use the same source. The biggest difference, though, comes from the heat output and efficiency of the two appliances. For example, a gas furnace will consume much more fuel than a gas fireplace. It will also produce more heat than the fireplace at the same time. So, while the operating costs for a gas furnace are higher, it is more efficient for a larger area than a gas fireplace.

Gas Fireplace Installation Cost

Gas fireplaces are an enticing and energy-efficient way of heating up a room in your home. Gas fireplaces are installed easier than wood-burning alternatives and usually cost less to run, which makes them great retrofit for homeowners who desire a fireplace in a room that doesn’t have one existing. Installing a stone gas fireplace to a room that doesn’t already have one typically costs around $6,550 for a pre-built fireplace, its installation, and finish work.

Gas Fireplace Cost

Fireplace Cost Comparisons

Gas fireplaces and inserts aren’t the only choices for installing a fireplace in your home. Wood-burning and electric fireplaces are also alternatives to think about:

Wood-Burning

  • $8,500 – $22,000
  • Produces real flames
  • High maintenance
  • Moderate safety risk
  • Not energy-efficient
  • Warms room efficiently
  • Moderate costs to run

Electric

  • $600 – $1,750
  • Does not produce flames
  • Nearly maintenance-free
  • No safety risk
  • Does not warm room efficiently
  • Low cost to run

Gas Fireplace Benefits

Here are three of the many benefits of installing a gas fireplace:

  • Fireplace appearance
  • Energy-efficient 
  • Required maintenance

It’s nearly impossible to mistake either a gas or electric fireplace for any sort of traditional wood-burning unit, but there is a wide range of designs that both models can come in. If you are looking for the closest look to an authentic fireplace, you can’t beat a gas model. A gas fireplace will actually produce the flame and come as close as possible to replicating a wood-burning fireplace.

Energy efficiency may be the biggest difference one can find between gas and electric versus wood-burning fireplaces. Depending on the size and model, the energy efficiency can vary widely. Most gas fireplaces come in around 70-90% in terms of converting energy to heat. The typical operating cost of a gas model is $60, per year.

We know the typical costs of the unit and the expense of installation, but what about general maintenance? Well, the good news is you will likely save money when opting for a gas fireplace over the traditional offerings. Gas fireplaces require considerably less general maintenance for homeowners. Check valves from time to time, just to make sure they are running properly. Electric fireplaces require no regular maintenance at all.

Gas Fireplace Installation Phoenix & Chandler, Arizona

If you live in Chandler, or surrounding cities in the Phoenix, Arizona area and want a gas fireplace installed; Diversified Builder, Inc. can help! We offer indoor and outdoor fireplace installation in Phoenix & Chandler, Arizona. We also install commercial and residential brick veneers. Contact us Today!

Written by Brian B

Cost Of Gas Fireplace Installation In 2022

Gas Fireplace Cost

The average cost to install a gas fireplace in the U.S. is about $4,500 in the year 2022. Prices will range from $2,300-$10,000, according to Homeadvisor.

How Much Does It Cost To Install A Gas Fireplace?

Gas fireplaces are an enticing and energy-efficient way of heating up a room in your home. Gas fireplaces are installed easier than wood-burning alternatives and usually cost less to run, which makes them great retrofit for homeowners who desire a fireplace in a room that doesn’t have one existing. Installing a stone gas fireplace to a room that doesn’t already have one typically costs around $6,550 for a pre-built fireplace, its installation, and finish work.

Other Cost Factors

  • Vented or ventless installations
  • Gas logs cost
  • Gas logs installation cost
  • Gas fireplace inserts

Fireplace Cost Comparisons

Gas fireplaces and inserts aren’t the only choices for installing a fireplace in your home. Wood-burning and electric fireplaces are also alternatives to think about:

Wood-Burning

  • $8,500 – $22,000
  • Produces real flames
  • High maintenance
  • Moderate safety risk
  • Not energy-efficient
  • Warms room efficiently
  • Moderate costs to run

Electric

  • $600 – $1,750
  • Does not produce flames
  • Nearly maintenance-free
  • No safety risk
  • Does not warm room efficiently
  • Low cost to run

Labor Costs

Labor costs for a gas fireplace installation range widely depending on a couple of factors. Direct-vent models will cost more to install due to a vent pipe needing to be added. If you don’t currently have a gas line to your home, you will have to install one, this will increase the cost.

Using a built-in unit as compared to an insert also increases the cost. The average costs related with installing a gas fireplace will include $600 for firebox installation, $750 for the vent pipe, $2,750 for the complete installation and finishing work, and around $150 to $800 for the gas line, depending on how far it’s required to run.

Fireplace Installation Near Me

Improvements and Enhancement

Every gas fireplace installation is going to be different. There are a lot of other improvements and enhancements you may want to think about adding to the fireplace, which can influence the scope of the project.

Installing A Chimney

A real chimney can improve the curb appeal of your home and may increase its value. While not needed for a gas fireplace, some homeowners may still want to have one install. This can increase the cost of the project by $60 to $95 a square foot of chimney added.

Artificial Logs

Artificial logs, sometimes called faux logs, are an option some people choose to enhance the appearance of the flames. Bear in mind that they need to be kept clean, and they increase the maintenance of the fireplace. They also add $100 to $400 to the overall cost.

Mantel

A mantel frames the fireplace and enhances its appearance. Mantels can be made of a lot of materials, including wood and stone, and can add around from $500 to $5,000 to the cost of the installation.

Enclosures

The majority of gas fireplaces have glass doors, but in a lot of cases, they need to be added separately. If this is the case, anticipate paying an additional $300 to $500.

Blower And Fan

Installing a blower and fan to your fireplace will help the heat circulate more quickly, warming up the room faster. Typically added during installation, this can increase the cost by about $100.

Gas Fireplace Benefits

Here are three of the many benefits of installing a gas fireplace:

  • Fireplace appearance
  • Energy-efficient 
  • Required maintenance

Fireplace Appearance

It’s nearly impossible to mistake either a gas or electric fireplace for any sort of traditional wood-burning unit, but there is a wide range of designs that both models can come in. If you are looking for the closest look to an authentic fireplace, you can’t beat a gas model. A gas fireplace will actually produce the flame and come as close as possible to replicating a wood-burning fireplace.

Electric versions may not produce flames, but they will certainly generate heat. Electric fireplaces will project imagery of burning logs; and this image can be enhanced to your liking depending on which model you choose. LED lighting or even videos can accompany your electric unit. Wall mounting is another popular option when you choose electric over gas for your home.

Energy-Efficient

Energy efficiency may be the biggest difference one can find between gas and electric versus wood-burning fireplaces. Depending on the size and model, the energy efficiency can vary widely. Most gas fireplaces come in around 70-90% in terms of converting energy to heat. The typical operating cost of a gas model is $60, per year.

Costing only about $25 per year to run, electric fireplaces offer another option for homeowners looking for extra warmth during the cooler seasons. A gas fireplace may warm the entire surrounding area more efficiently, but electric models do convert their entire energy into heat. Whether you are looking for energy efficiency or just trying to warm up the home, either of these units will prove invaluable.

Required Maintenance

We know the typical costs of the unit and the expense of installation, but what about general maintenance? Well, the good news is you will likely save money when opting for a gas fireplace over the traditional offerings. Gas fireplaces require considerably less general maintenance for homeowners. Check valves from time to time, just to make sure they are running properly. Electric fireplaces require no regular maintenance at all.

Gas Fireplace Installation Phoenix & Chandler, Arizona

If you live in Chandler, or surrounding cities in the Phoenix, Arizona area and want a gas fireplace installed; Diversified Builder, Inc. can help! We offer indoor and outdoor fireplace installation in Phoenix & Chandler, Arizona. We also install commercial and residential brick veneers. Contact us Today!

Written by Brian B

Are Gas Fireplaces Safe?

Are Gas Fireplaces Safe?

It is true that gas fireplaces are much safer than their wood-burning counterparts, but that doesn’t necessarily mean that people should ignore some basic safety precautions.

Gas Fireplace Safety Tips

Of course, any gas appliance can be dangerous, yet a gas fireplace is no different from any other gas appliance that may be found inside a home. These appliances, though, have become much safer over the past few decades. Safety precautions now come built into the units in order to protect against any at-home hazards. Many gas fireplaces will come equipped with an oxygen depletion sensor, designed to shut the unit off entirely when a low amount of oxygen level is reached.

Follow these safety tips when using your gas fireplace:

1. Pay Attention To Clearance Zones

Sure, it is possible to place electronics and/or decor around the fireplace, but no matter what there will always be a specified area surrounding the unit where it is unsafe to place items. Never put any wood, books or drapes too close to the firebox.

2. Check The Safety Screen Barrier

Gas fireplaces will feature a glass panel which separates the firebox from the rest of the room. This makes the firebox safer and more efficient, at the same time. The only downside is this glass can become extremely hot to the touch. Nowadays, a safety mesh screen is required as part of the unit. Double check to make sure this screen has been installed properly.

3. Schedule Yearly Maintenance

Even though modern gas units require far less maintenance than in the past, it’s still a good idea to schedule an annual inspection of the unit. The best time to schedule this appointment is before the cooler season hits and you wish to use the fireplace more often.

4. Get A Double Glass Heat Barrier

If you want more safety and efficiency, then adding a double glass heat barrier is the way to go. Two panes of glass will be positioned on the outer and inner panel, with a ventilation layer in between.

5. Keep Children Safe

The best way to keep your children safe at all times is to warn them of the danger associated with fireplaces. Tell them to stay away from the unit whenever it is turned on.

Diversified Builder Supply In Phoenix & Chandler, Arizona

If you live in Chandler, or surrounding cities in the Phoenix, Arizona area and want a gas fireplace installed; Diversified Builder, Inc. can help! We offer indoor and outdoor fireplace installation in Phoenix & Chandler, Arizona. We also install commercial and residential brick veneers. Contact us Today!

Written by Brian B

Do Gas Fireplaces Need To Be Cleaned?

Do Gas Fireplaces Need To Be Cleaned?

If you are wondering if your gas fireplace needs to be cleaned regularly, the answer is yes!

Regularly cleaning your gas unit will keep the fireplace safe and performing efficiently for years to come. Use the following steps when attempting to clean the fireplace on your own.

How To Clean A Gas Fireplace

Before cleaning your gas fireplace, make sure you have the following tools/supplies on hand:

  • Fireplace glass cleaner
  • Rags
  • Warm water
  • Hand broom or paintbrush (unused)
  • Vacuum with hose attachment
  • Nylon net

Now follow this guide for cleaning:

1. Turn Gas Off

This step is the most obvious, but it still deserves a mention. Turn off your gas before you do anything! The gas valve is usually located on the wall next to the actual fireplace. Turn this completely off. After turning it off, make sure the pilot light is off, then wait a few minutes. This extra time allows the gas to exit the piping safely. If you have used the unit recently, check to see if all the components are completely cooled off.

2. Disassemble Fireplace

The disassembling process will always depend on the actual design of your fireplace. Remove glass doors, mesh curtain or metal screen prior to cleaning. Now, disassemble the logs and remove the burner unit. Take the components outdoors for cleaning, if possible.

3. Brush And Inspect Area

Using a hand broom, carefully brush away dust or debris from logs and other components. Never spray cleaners of any kind on the components! Inspect each log while cleaning for cracks, holes or excessive burn markings. Inspect the vent hole for any clogs after brushing debris from the area.

4. Vacuum Dust/Debris

There will be plenty of dust in the area. Use a vacuum hose to remove dust from each and every side of the rocks. After cleaning the rocks, vacuum all corners of the fireplace. Use a cloth to wipe down the gas line components and pilot light.

5. Polish Glass

Do not use a window glass cleaner or any sort of oven cleaner to wipe down the fireplace. Pick up a fireplace gas cleaner at a local hardware store. Spray it on and give it a few minutes before wiping it away with a soft cloth.

6. Wipe Mantle And Hearth

Clean any and all soot or dust from both the mantle and hearth. Dust with a soft cloth lightly, depending on the surface type.

7. Reassemble Fireplace

Reassemble the logs, burner, stones and replace the screen(s). Check the exterior vents for any blockages. It is now safe to turn the gas valve back on at this point.

How Much Does It Cost To Install A Gas Fireplace?

The average cost to install a gas fireplace in the U.S. is about $4,500 in the year 2021. Prices will range from $2,300-$10,000, according to Homeadvisor.

Gas fireplaces are an enticing and energy-efficient way of heating up a room in your home. Gas fireplaces are installed easier than wood-burning alternatives and usually cost less to run, which makes them great retrofit for homeowners who desire a fireplace in a room that doesn’t have one existing. Installing a stone gas fireplace to a room that doesn’t already have one typically costs around $6,550 for a pre-built fireplace, its installation, and finish work.

Gas Fireplace Cost

Other Cost Factors

  • Vented or ventless installations
  • Gas logs cost
  • Gas logs installation cost
  • Gas fireplace inserts

Diversified Builder Supply In Phoenix & Chandler, Arizona

If you live in Chandler, or surrounding cities in the Phoenix, Arizona area and want a gas fireplace installed; Diversified Builder, Inc. can help! We offer indoor and outdoor fireplace installation in Phoenix & Chandler, Arizona. We also install commercial and residential brick veneers. Contact us Today!

Written by Brian B

How Much Does It Cost To Run A Gas Fireplace

How Much Does It Cost To Run A Gas Fireplace

The energy consumption of a gas fireplace is measured in British Thermal Units (BTU). Therefore, one BTU is the total amount of energy needed to boost the temperature of one pound of water by one degree Fahrenheit. If a fireplace comes with a BTU rating of 30,000, adding in the cost of gas at 90 cents per therm, multiply the two figures, then divide by 100,000 to estimate your monthly costs.

For example, the average monthly cost to run a gas fireplace in Arizona is $15.62, according to EIA.gov. If you are searching for “how much does it cost to run a gas fireplace“, this post will break down all the variables affecting overall costs.

Gas Fireplace Costs

Here are a few of the factors affecting overall costs to run a gas fireplace:

  • The Price Of Gas
  • Electricity Comparison
  • Central Heat Comparison
  • Gas Fireplace Installation Cost

The Price Of Gas

The price of gas is one of the biggest factors affecting the cost of owning and running a gas fireplace. Of course, location is crucial is determining how much you’ll have to spend. Season and market conditions will undoubtedly come into play, as well. With gas prices currently soaring across the nation, gas fireplaces will be more costly to operate for the foreseeable future.

Electricity Comparison

First, determine how much electricity costs per therm so that you can accurate compare the gas fireplace operating costs to the cost of electric heat. Electricity costs are determined by kilowatt hours. One kilowatt is equivalent to 3,413 BTUs. The easiest way to figure out your cost is to multiply the kilowatt-hour cost of electricity by 100,000, then divide that number by 3,413. It sounds complicated, but it’s very important for homeowners on a budget to estimate costs ahead of installation.

Central Heat Comparison

Comparing gas fireplace operation costs to the cost of a gas central heating system will require various considerations. The fuel cost will remain the same since both appliances use the same source. The biggest difference, though, comes from the heat output and efficiency of the two appliances. For example, a gas furnace will consume much more fuel than a gas fireplace. It will also produce more heat than the fireplace at the same time. So, while the operating costs for a gas furnace are higher, it is more efficient for a larger area than a gas fireplace.

Gas Fireplace Installation Cost

Gas fireplaces are an enticing and energy-efficient way of heating up a room in your home. Gas fireplaces are installed easier than wood-burning alternatives and usually cost less to run, which makes them great retrofit for homeowners who desire a fireplace in a room that doesn’t have one existing. Installing a stone gas fireplace to a room that doesn’t already have one typically costs around $6,550 for a pre-built fireplace, its installation, and finish work.

Gas Fireplace Cost

Fireplace Cost Comparisons

Gas fireplaces and inserts aren’t the only choices for installing a fireplace in your home. Wood-burning and electric fireplaces are also alternatives to think about:

Wood-Burning

  • $8,500 – $22,000
  • Produces real flames
  • High maintenance
  • Moderate safety risk
  • Not energy-efficient
  • Warms room efficiently
  • Moderate costs to run

Electric

  • $600 – $1,750
  • Does not produce flames
  • Nearly maintenance-free
  • No safety risk
  • Does not warm room efficiently
  • Low cost to run

Gas Fireplace Benefits

Here are three of the many benefits of installing a gas fireplace:

  • Fireplace appearance
  • Energy-efficient 
  • Required maintenance

It’s nearly impossible to mistake either a gas or electric fireplace for any sort of traditional wood-burning unit, but there is a wide range of designs that both models can come in. If you are looking for the closest look to an authentic fireplace, you can’t beat a gas model. A gas fireplace will actually produce the flame and come as close as possible to replicating a wood-burning fireplace.

Energy efficiency may be the biggest difference one can find between gas and electric versus wood-burning fireplaces. Depending on the size and model, the energy efficiency can vary widely. Most gas fireplaces come in around 70-90% in terms of converting energy to heat. The typical operating cost of a gas model is $60, per year.

We know the typical costs of the unit and the expense of installation, but what about general maintenance? Well, the good news is you will likely save money when opting for a gas fireplace over the traditional offerings. Gas fireplaces require considerably less general maintenance for homeowners. Check valves from time to time, just to make sure they are running properly. Electric fireplaces require no regular maintenance at all.

Gas Fireplace Installation Phoenix & Chandler, Arizona

If you live in Chandler, or surrounding cities in the Phoenix, Arizona area and want a gas fireplace installed; Diversified Builder, Inc. can help! We offer indoor and outdoor fireplace installation in Phoenix & Chandler, Arizona. We also install commercial and residential brick veneers. Contact us Today!

Written by Brian B

Gas Fireplace Installation Cost 2021

Gas Fireplace Cost

The average cost to install a gas fireplace in the U.S. is about $4,500 in the year 2021. Prices will range from $2,300-$10,000, according to Homeadvisor.

How Much Does It Cost To Install A Gas Fireplace?

Gas fireplaces are an enticing and energy-efficient way of heating up a room in your home. Gas fireplaces are installed easier than wood-burning alternatives and usually cost less to run, which makes them great retrofit for homeowners who desire a fireplace in a room that doesn’t have one existing. Installing a stone gas fireplace to a room that doesn’t already have one typically costs around $6,550 for a pre-built fireplace, its installation, and finish work.

Other Cost Factors

  • Vented or ventless installations
  • Gas logs cost
  • Gas logs installation cost
  • Gas fireplace inserts

Fireplace Cost Comparisons

Gas fireplaces and inserts aren’t the only choices for installing a fireplace in your home. Wood-burning and electric fireplaces are also alternatives to think about:

Wood-Burning

  • $8,500 – $22,000
  • Produces real flames
  • High maintenance
  • Moderate safety risk
  • Not energy-efficient
  • Warms room efficiently
  • Moderate costs to run

Electric

  • $600 – $1,750
  • Does not produce flames
  • Nearly maintenance-free
  • No safety risk
  • Does not warm room efficiently
  • Low cost to run

Labor Costs

Labor costs for a gas fireplace installation range widely depending on a couple of factors. Direct-vent models will cost more to install due to a vent pipe needing to be added. If you don’t currently have a gas line to your home, you will have to install one, this will increase the cost.

Using a built-in unit as compared to an insert also increases the cost. The average costs related with installing a gas fireplace will include $600 for firebox installation, $750 for the vent pipe, $2,750 for the complete installation and finishing work, and around $150 to $800 for the gas line, depending on how far it’s required to run.

Fireplace Installation Near Me

Improvements and Enhancement

Every gas fireplace installation is going to be different. There are a lot of other improvements and enhancements you may want to think about adding to the fireplace, which can influence the scope of the project.

Installing A Chimney

A real chimney can improve the curb appeal of your home and may increase its value. While not needed for a gas fireplace, some homeowners may still want to have one install. This can increase the cost of the project by $60 to $95 a square foot of chimney added.

Artificial Logs

Artificial logs, sometimes called faux logs, are an option some people choose to enhance the appearance of the flames. Bear in mind that they need to be kept clean, and they increase the maintenance of the fireplace. They also add $100 to $400 to the overall cost.

Mantel

A mantel frames the fireplace and enhances its appearance. Mantels can be made of a lot of materials, including wood and stone, and can add around from $500 to $5,000 to the cost of the installation.

Enclosures

The majority of gas fireplaces have glass doors, but in a lot of cases, they need to be added separately. If this is the case, anticipate paying an additional $300 to $500.

Blower And Fan

Installing a blower and fan to your fireplace will help the heat circulate more quickly, warming up the room faster. Typically added during installation, this can increase the cost by about $100.

Gas Fireplace Benefits

Here are three of the many benefits of installing a gas fireplace:

  • Fireplace appearance
  • Energy-efficient 
  • Required maintenance

Fireplace Appearance

It’s nearly impossible to mistake either a gas or electric fireplace for any sort of traditional wood-burning unit, but there is a wide range of designs that both models can come in. If you are looking for the closest look to an authentic fireplace, you can’t beat a gas model. A gas fireplace will actually produce the flame and come as close as possible to replicating a wood-burning fireplace.

Electric versions may not produce flames, but they will certainly generate heat. Electric fireplaces will project imagery of burning logs; and this image can be enhanced to your liking depending on which model you choose. LED lighting or even videos can accompany your electric unit. Wall mounting is another popular option when you choose electric over gas for your home.

Energy-Efficient

Energy efficiency may be the biggest difference one can find between gas and electric versus wood-burning fireplaces. Depending on the size and model, the energy efficiency can vary widely. Most gas fireplaces come in around 70-90% in terms of converting energy to heat. The typical operating cost of a gas model is $60, per year.

Costing only about $25 per year to run, electric fireplaces offer another option for homeowners looking for extra warmth during the cooler seasons. A gas fireplace may warm the entire surrounding area more efficiently, but electric models do convert their entire energy into heat. Whether you are looking for energy efficiency or just trying to warm up the home, either of these units will prove invaluable.

Required Maintenance

We know the typical costs of the unit and the expense of installation, but what about general maintenance? Well, the good news is you will likely save money when opting for a gas fireplace over the traditional offerings. Gas fireplaces require considerably less general maintenance for homeowners. Check valves from time to time, just to make sure they are running properly. Electric fireplaces require no regular maintenance at all.

Gas Fireplace Installation Phoenix & Chandler, Arizona

If you live in Chandler, or surrounding cities in the Phoenix, Arizona area and want a gas fireplace installed; Diversified Builder, Inc. can help! We offer indoor and outdoor fireplace installation in Phoenix & Chandler, Arizona. We also install commercial and residential brick veneers. Contact us Today!

Written by Brian B

How To Light A Gas Fireplace

If you are searching online for “how to light a gas fireplace” or even “how to turn on a gas fireplace,” then this post is for you! A gas fireplace is much easier to operate and maintain than a traditional wood fireplace. Use this as a guide on how to properly light a gas fireplace using several different ignition systems.

How To Turn On A Gas Fireplace

Gas fireplaces send natural gas to a paneled and insulated fireplace unit. This gas originates from a main line. The unit is then ignited by a pilot light which sparks the gas line underneath the ceramic logs. This pilot light will remain on until flames are created by the simple touch of a button. Now, there are several different ways to ignite your fireplace, so lets explore your options below.

Gas Fireplace Without Electricity

You may or may not need electricity to power your fireplace, depending on where the unit is located. Typically, gas fireplaces come with pilot lights that can ignite the flames with or without electricity. Some modern fireplaces may have an electronic ignition system that requires external electricity. But, in most cases a backup battery is available.

Gas Fireplace Pilot Light

The pilot light is essentially just a starter light, hidden within the fireplace as to not take away any of the unit’s aesthetically-pleasing look. The first thing individuals must do is locate the pilot light to turn on the fireplace. Generally, this light is located underneath the main frame of the unit. The light will be small, so make sure you spend enough time to properly locate this switch.

Gas Fireplace Won’t Ignite

This is a common problem for most individuals trying to ignite the fireplace for the first time. Check that the gas valve is on and emitting gas first. If you are holding the pilot light and hear clicking sounds, this means the starter is priming itself. This is done to safely receive gas and eventually ignite the unit.

Gas Fireplace Cost

Gas fireplaces come in between the costs of electric and wood-burning fireplaces. Electric unit installation costs range from $600-$1,750, while wood-burning fireplaces cost between $8,500-$22,000. A gas fireplace will cost anywhere from $3,650-$7,800, but the price is well worth the reward. Gas fireplace owners will save money in the long run due to the low amount of maintenance these units require. And compared to wood-burning fireplaces, gas is much more energy efficient. Installing a gas fireplace typically costs an average of $6,550, according to FixR.

Gas Fireplace Installation Phoenix & Chandler, Arizona

If you live in Chandler, or surrounding cities in the Phoenix, Arizona area and want a gas fireplace installed; Diversified Builder, Inc. can help! We offer indoor and outdoor fireplace installation in Phoenix & Chandler, Arizona. We also install commercial and residential brick veneers. Contact us Today!

Written by webtechs

How Much Does Gas Fireplace Installation Cost?

Gas Fireplace Cost

The average cost to install a gas fireplace is about $4,500 with average prices ranging from $2,500 to $10,000 in the US for 2020 according to Thumbtack.

How Much Does It Cost To Install A Gas Fireplace?

Gas fireplaces are an enticing and energy-efficient way of heating up a room in your home. Gas fireplaces are installed easier than wood-burning alternatives and usually cost less to run, which makes them great retrofit for homeowners who desire a fireplace in a room that doesn’t have one existing.

According to FixR, “The average costs associated with installing a gas fireplace include $600 for the firebox installation, $750 for the vent pipe, $2,750 for the full installation and finishing work, and between $150 and $800 for the gas line, depending on how far it needs to run.”

Installing a stone gas fireplace to a room that doesn’t already have one typically costs around $6,550 for a pre-built fireplace, its installation, and finish work.

Gas Vs Wood-Burning Vs Electric Fireplace

Gas fireplaces and inserts aren’t the only choices for installing a fireplace in your home. Wood-burning and electric fireplaces are also alternatives to think about:

Gas

  • $3,650 – $7,800
  • Produces real flames
  • Low maintenance
  • Moderate safety risk
  • Warms room efficiently
  • Moderate costs to run

Wood-Burning

  • $8,500 – $22,000
  • Produces real flames
  • High maintenance
  • Moderate safety risk
  • Not energy-efficient
  • Warms room efficiently
  • Moderate costs to run

Electric

  • $600 – $1,750
  • Does not produce flames
  • Nearly maintenance-free
  • No safety risk
  • Does not warm room efficiently
  • Low cost to run

Labor

Labor costs for a gas fireplace installation range widely depending on a couple of factors. Direct-vent models will cost more to install due to a vent pipe needing to be added. If you don’t currently have a gas line to your home, you will have to install one, this will increase the cost.

Using a built-in unit as compared to an insert also increases the cost. The average costs related with installing a gas fireplace will include $600 for firebox installation, $750 for the vent pipe, $2,750 for the complete installation and finishing work, and around $150 to $800 for the gas line, depending on how far it’s required to run.

Improvements and Enhancement

Every gas fireplace installation is going to be different. There are a lot of other improvements and enhancements you may want to think about adding to the fireplace, which can influence the scope of the project.

Installing A Chimney

A real chimney can improve the curb appeal of your home and may increase its value. While not needed for a gas fireplace, some homeowners may still want to have one install. This can increase the cost of the project by $60 to $95 a square foot of chimney added.

Artificial Logs

Artificial logs, sometimes called faux logs, are an option some people choose to enhance the appearance of the flames. Bear in mind that they need to be kept clean, and they increase the maintenance of the fireplace. They also add $100 to $400 to the overall cost.

Mantel

A mantel frames the fireplace and enhances its appearance. Mantels can be made of a lot of materials, including wood and stone, and can add around from $500 to $5,000 to the cost of the installation.

Enclosures

The majority of gas fireplaces have glass doors, but in a lot of cases, they need to be added separately. If this is the case, anticipate paying an additional $300 to $500.

Blower And Fan

Installing a blower and fan to your fireplace will help the heat circulate more quickly, warming up the room faster. Typically added during installation, this can increase the cost by about $100.

Gas Fireplace Installation Phoenix & Chandler, Arizona

If you live in Chandler, or surrounding cities in the Phoenix, Arizona area and want a gas fireplace installed; Diversified Builder, Inc. can help! We offer indoor and outdoor fireplace installation in Phoenix & Chandler, Arizona. We also install commercial and residential brick veneers. Contact us Today!