Electric Fireplace Not Working: Causes & Solutions

Here are five common reasons why your electric fireplace is not working at all.

1. Check The Power/Fuel Supply

The first thing to check when your fireplace fails to turn on is the power source. Electric fireplaces utilize a steady electricity supply, while gas fireplaces need an adequate supply of gas.

Make sure the power switch is turned on for the electric fireplace and also verify that the connecting cord is firmly plugged in. For a gas fireplace, check that the gas supply valve is turned on. If you have not been using the fireplace, you may need to expel some air from the pilot tubing. Hold the pilot button down for about one to two minutes to purge out any air.

2. Look For Tripped Circuit Breakers

Check to see if the circuit breaker has not tripped. Modern electric and gas fireplaces incorporate safety features, such as circuit breakers. These safety sentinels are specifically designed to trip and break the power supply in the event of electrical surges or malfunctions.

If the electric fireplaces refuse to turn on or stop working suddenly, check the circuit breakers that are associated with the fireplace. Reset your breaker if it has tripped, and restart your fireplace at this time. Call a professional fireplace maintenance technician if your circuit continues to trip.

3. Check For Fireplace Warning Signs

Survey your fireplace area for any warning signs of trouble. Check for any unusual odors emitting from the fireplace. Strong gas scents could indicate a leak. If this is the case, then call a professional as soon as possible.

Empty clicking sounds when trying to ignite the fireplace could mean there’s an issue with the spark igniter. Always remain vigilant with your fireplace.

4. Spark Igniter Failure

The spark igniter or ignition is responsible for the initial flame that ignites the fuel within a fireplace. A dirty or malfunctioning igniter can prevent the gas from igniting properly.

Carefully inspect the igniter switch for any signs of damage, wear, or debris. Clean a dirty igniter using a microfiber cloth or soft brush in order to remove any dirt that may be interfering with the sparking process. Consider replacing the igniter if it still fails to produce a spark.

5. Inspect The Thermocouple/Thermopile

If the other troubleshooting measures do not result in the fireplace starting, inspect the thermocouple or thermopile. The thermocouple is a metal probe that monitors the temperature and gas valve which sparks life into the fireplace.

This electrical safety device calls for precise placement for the best performance. Modern gas fireplaces now feature the thermopile for accurate temperature-sensing and generation of electric voltage. Call a professional to examine your thermocouple or thermopile.